Herculiner Home Page
Product Information
Frequently Asked Questions
Installation/Instructions
Material Safety Data Sheets
Stores That Carry Herculiner
Links to Related Sites


Testimonials (page 3)
 

Here are some testimonials/letters our customers have sent in:

This weekend I opted to spray the HERCULINER in and it came out great! I have a 2003 Jeep Wrangler and spent Friday and Saturday taking the Jeep apart, sanding, cleaning, masking and spraying the Jeep. I think in total I spent about 18 hours (including reassembly on Sunday) on this project . . . The end result seems impressive and all the guys on the block seemed very impressed by the outcome as well.

Matt Segall

I have an 89 Wrangler that I just finished Herculining the entire tub. It looks great and was easy to apply. Took me longer to remove the seats and belts from the Tub that it did to apply your product. I am very happy with this and would be happy to tell anyone that asked about your product. Thank you for your help and for your great product.

Jason Woodard


This past summer was the first time I used the Herculiner product on my tractor. Half way through the season my tires had been worn extremely thin. At several of the pulls the tracks were so tough that chunks of rubber had been torn away from the tires exposing the threads and traces of the inner tube. At that point without new tires I would be unable to compete at the remaining pulls. I could not accept my season being cut short. I wanted to find an economical way to restore and save the tires I had and finish the season. I decided to experiment with the Herculiner product. I found that by applying Herculiner using several specific steps, I could create a competitive tire that had sharp edges and a surface like sand paper that could better grip the track. I started by grinding the edges of the tread and cleaning the surface with alcohol. I applied one coat of the product according to the directions to the surface of the tread and let it set for 24 hours. I then sharpened and cleaned the edge of the bars and prepared the tire for the second coat. Instead of stirring the product, I used the can of Herculiner after the can sat all night and the chunks of rubber had settles to the bottom. For the second coat, I applied only the liquid that was left at the top of the can. This hardened the tread on the tires. The first pull after applying Herculiner to my tires I walked away with 1st place in both of the classes I competed in and my tires were still intact. Instead of being forced out of competition by my bad worn out tires, I was able to finish the season and receive the honor of 2003 Season Points Champion thanks to Herculiner!

Sincerely,
Joel Conderman


I have a 1972 steel bottom house boat in Atlanta. The problem with steel bottoms is, if you beach them then you scrape the paint off, and we all know what happens when you mix water and bare metal. In the past, the only option was to have a local boat repair shop fabricate and weld on a stainless beaching plate to the bow of the ship, which costs a couple grand. I found HERCULINER at AutoZone and thought it would work. Installed HERCULINER on the bow last season when I took the boat out to inspect and repaint the bottom side. $100 dollars and I beach with peace of mind. Went diving at the end of the season to look at the condition of the bow and it's still perfect! THANKS HERCULINER! I am going to cover my entire inner hull of my 1965 fiberglass run about this winter.

Sincerely,
Rick Gullett


I am writing to let you know how pleased we are of your product, Herculiner Polyurethane Protective Coating. We are the exclusive builders of the GA-ATM's, a.k.a. Georgia All Terrain Monsters. All of our utility dump beds on our BULLDOG model have been coated with your product. As a new company/manufacture, we have decided to use your product exclusively, I have always considered reliability and customer satisfaction to be a driving force in any business and I have certainly been satisfied with your product. I was at the Indy show in September of this year, showing our trucks with your product and got great response from the crowd.

Thank you,
Tommy Gilder

Built this "Batmobile" out of an 88' Ford Escort GT. Used HERCULINER for the exterior. I have had it in several parades and won a trophy at a local car show! Thought you might like to see it.

Paul Floyd


I just finished applying your black Herculiner to my truck...my whole truck! Yes, that's right, I took a drive down to Massena NY and picked up two gallons of it at the local NAPA and covered my 1989 Ford Bronco 2 with three coats. Let me tell you that your product is the best thing that ever happened to my truck, my best mod so far. I can't wait till this Sunday when I get to really test it out on the local trails. I will recommend Herculiner to all that want to protect the body of their off-road rigs. 

Thanks,
Eric Rivard

A couple of days later . . .
I took my bronco out on Sunday and really put it to the test in some very narrow trails and nothing, no scratches, this stuff is incredibly resistant!!!


Another ENTIRELY HERCULINED Jeep!

David Lipshaw,
Port Carbon, PA


 

Send pictures (before/after) and comments to:

HERCULINER Story
4065 Commercial Ave.
Northbrook, IL 60062

A Special Thanks to all our Herc Club Members who sent in their before/after shots and testimonials! We appreciate the feedback and look forward to serving your automotive needs in the future. For more performance automotive products check out www.247AutoParts.com.

 

For More information or to Order,
Call Toll Free 1-877-HERCULINER (1-877-437-2854)
Or purchase online at www.247autoparts.com
More Info

Download our
HERC Spec Sheet
in PDF format

Don't have AdobeAcrobat? Click on banner to get for FREE


Visit our Store Locator or Buy Now at 24-7 Autoparts

Business Center
Spray Program >
B-to-B Artwork >

Contact Us
We're happy to answer any questions you
may have!

HERCULINER
Videos
 
 
Copyright (C) 2011 Old World Industries, LLC
All Rights Reserved. - Terms and Conditions